Programmer

For single-heater programming: install the Convectair unit using a standard 2-conductor cable.
7392 FP: Programmable pilot-wire module. Each module can control scheduled temperature variations up to 20 compatible heating units.
Wiring requirements: 3-conductor cable that can serve as a communication wire from the module to the units.
7392 ECP and RCP : Programmable powerline carrier unit consisting of a transmitter module (ECP) and a receiver module (RCP). Each ECP module can control scheduled temperature variations up to 20 heating units equipped with receiver modules (RCP). Maximum of 3 ECP modules per home (3 heating zones). No special wiring required. Master units compatible with FP, ECP or RCP modules: Allegro(7302,7303,7304), Opera(7720) and Allegro Duo(7791).
Remote units that can receive FP signals: All Convectair units, with the exception of Soprano (7808) and 120V models.
Note : Any heater equiped with a RCP module can in turn relay a FP signal to other remote units (contact us for more information

Continuously displays current time, day, heating mode (Comfort, Economy or Frost Protection), daily program and hourly status; displays hour, day and program while settings are being entered.

Choice of 7 pre-selected programs or a customized hour-by-hour Comfort or Economy program for each day of the week and a Frost protection mode.
The Programmer module lets you override current program centrally or individually for each heater.
Simple, easy programming instructions are found directly on the Programmer module.
In case of power failure, the Programmer module will keep its charge for 10 hours. Beyond that, only the time and day must be reset. All pre-selected and custom programs are saved indefinitely.

Choice of 7 pre-selected programs or a customized hour-by-hour Comfort or Economy program for each day of the week and a Frost protection mode.
The Programmer module lets you override current program centrally or individually for each heater.
Simple, easy programming instructions are found directly on the Programmer module.
In case of power failure, the Programmer module will keep its charge for 10 hours. Beyond that, only the time and day must be reset. All pre-selected and custom programs are saved indefinitely.

Keeping pace with the household
The only fluctuations allowed are the ones you program to match your household’s pace. By programming a heating schedule for each room, you can save considerable energy. Regularly lowering the temperature by 4 °C over a period of four or more hours can save 15% in heating costs, so every single heating period can make a difference. Temperature setbacks can take place when the house is empty or during the night, when a cooler temperature makes for a good night’s sleep.

An example of good programming
During the night, the temperature throughout the house is 16°C. At the planned wake-up hour, the program implements a scheduled 4 °C increase in all the rooms connected to the programmer. When everyone leaves for school or work, the same Convectairs slow down, and the temperature drops by 4 °C again. Half an hour before the first key turns in the lock at the end of the day, the heating rises once more.
To divide a house into several zones that follow different heating schedules, you simply need a programmer per zone: one for the bedrooms, and another for the living areas, for example. At Convectair, we want you to be comfortable without wasting energy.

when you purchase or install a heater in a home, you should establish a heat distribution plan to evaluate the heating requirement of each room or area of the home. Installing heat sources at several strategic points prevents the overheating of one single unit as it tries to keep up with demand for the whole room. When the heaters are placed at the right spots around the room, the result is maximum comfort and complete safety.

Would you like us to plan your ideal heating plan? Contact the team of Convectair experts. This service is free, and it could save you a bundle!
1 800 463-6478 / support@convectair.ca

Do a heat loss calculation on-line now!

Convectair heating units meet Canadian and American safety standards . In addition, their designs are based on the more stringent performance standards applied in Europe.

• 2 years against all defects

Once the guarantee expires, the Convectair technical team is a reliable source of advice and service. Many years after purchase, a Convectair unit can be repaired and refurbished.

Consult here a list of our authorized Service Centers

For guaranteed, dependendable operation, we recommend that all units be installed by a licensed electrical contractor.