Bolero

Installation Quick-mounted surface installation with screw-in bracket.

Connection 240v, 60 cycles with a flexible armoured power cord and wiring connector supplied with heater. Installation requires wall box (not included).

Installation height 6 in

Clearances
Front: 20 in Sides: 6 in Above: 6 in.

Note 3-conductor cable or 2-conductor cable with a third wire should be used if unit is to be linked with the Convectair Programmer module (7392 FP).

Total capacity (2000 W)
Radiant (750 W) Radiant front panel with integrated surface element.
Fan-forced heat (1250 W) on demand Low-thermal-mass heating element combined with low-pressure centrifugal blower.

Thermal protection
Radiant Manual reset overheat protection.
Fan-forced Resetable overheat protection. Reset by turning heater off.

Digital thermostat Built-in 2-stage digital thermostat ultraprecise to 1/5ºF for radiant front panel and full power mode control (2 000 W radiant and fan-forced heat).

Timer One-touch electronic timer: 30-minutes, 1 hour, 2 hours for quick heating or fast drying, with indicator light.

Programmer Programmer-compatible, pilot wire only.

Location Located on the front of the unit.

Dial Thermostat control.

One-touch button 1 On/Off, also serves as overheat protection reset and as full power mode selector with indicator light.
One-touch button 2 Timer control with indicator light.
One-touch button 3 Room temperature ventilation control with indicator light.

Indicator light Heating indicator light.

Steel construction with polyester/epoxy anti-rust powder coating.

Cabinet Splash-proof construction with rounded edges and built-in side wire covers.

Louvres Lateral cross flow air outlet, warming towels and moving air horizontally across the room.

Filter Easy-to-clean, removable rear-mounted dust filter for easier maintenance.

Accessories Three (3) bars adjustable and reversible bars and two (2) pegs included.

Color BB = White

For palpable heat
Radiant units directly heat bodies and objects, producing a caressing warmth similar to the feel of the sun's rays. They create a comforting hot spot, yet evenly distribute heat at the same time. Some radiant units are made for bathrooms while others are ideal in living areas. Gentle radiant heaters are preferred by those who seek an extra “warm comfort”. 

Power on demand
Fan-forced models are generally smaller and heat quickly by means of a stronger airflow. The low-thermal-mass heating element directs all the power into a small space. The heat from the element is directly transferred to the fan-driven air. Activated by a timer, these fan units supply heat only when you truly need it or request it.

when you purchase or install a heater in a home, you should establish a heat distribution plan to evaluate the heating requirement of each room or area of the home. Installing heat sources at several strategic points prevents the overheating of one single unit as it tries to keep up with demand for the whole room. When the heaters are placed at the right spots around the room, the result is maximum comfort and complete safety. Would you like us to plan your ideal heating plan? Contact the team of Convectair experts. This service is free, and it could save you a bundle! 1 800 463-6478 / support@convectair.ca

Do a heat loss calculation on-line now!

The bathroom is the one room where a lot of heat is needed for a short time only. That's why all our models for the bathroom—Bolero, Diva, Jazz, Piccolo,Samba, Calypso and Soprano—are equipped with a powerful fan that can heat up the room almost instantly.

Convectairs for the bathroom are designed to withstand splashes. The bigger models feature a control panel that is easy to access but safely out of children’s reach. The smaller units and the convection heaters have a panel that can be made tamper-proof. And all the fans (except the one of the Soprano) operate on a timer, so that the heater can’t be left on by mistake.

Convectair heating units meet Canadian and American safety standards . In addition, their designs are based on the more stringent performance standards applied in Europe.

• 2 years against all defects
• 5 years on heating elements

Once the guarantee expires, the Convectair technical team is a reliable source of advice and service. Even 20 years after purchase, a Convectair unit can be repaired and refurbished.

Consult here a list of our authorized Service Centers

For guaranteed, dependendable operation, we recommend that all units be installed by a licensed electrical contractor.